200 Years of Sawmilling
For nearly two centuries the story of sawmilling in the Southeast was enacted on this point on the Altamaha River. In the summer of 1721, men from South Carolina sawed the 3-inch planks to build Fort King George. In 1736, indentured servants of the Scottish Highlanders set up pit saws here and sawed lumber for the permanent houses of Darien and for public buildings in Savannah and Frederica. This was the first commercial manufacture of lumber in Coastal Georgia. Through the years, sawmilling continued on this site. In the latter part of the 18th century, a large water mill was constructed and used here, operated by impounding tidal water in a basin on flood tide and sawing with the ebb.
In 1818, the Darien Eastern Steam Sawmill was built here. Designed by an engineer from London, the mill have five gang saws. In use, with brief interruptions, until about 1905, it was then dismantled because of lack of large timber. A circular sawmill, built alongside the same basin, took its place, to be used until the end of the sawmill era in Darien.
GHM 095-6B GEORGIA HISTORICAL COMMISSION 1957
Plaque courtesy Lat34North.com.
Original page, with additional info, here.
Photo credit: Mike Stroud.